Faststone+

3M PE Form Tape Backing

3M PE Form Tape Backing

FastStone+ is bonded with 3M PE Form Tape. It sticks fast and hard so accurate placement “the first time” is required because it will not come off easily and damage may occur to the surface it was applied to while trying to remove the FastStone+. Not recommended for exterior use.

Before applying to the surface, make sure that the surface it is being applied to is free of dust, dirt and oils. After peeling off the protective cover on the backing, be careful as to the placement of the product since the adhesion is immediate and permanent.

Fast and easy direct application on all flat, clean, oil and dust free surfaces. For decorative designs of all kinds, ideal for walls, ceilings, displays or for “DIY”. If used for direct application, it is recommended to use exact cut-to-size sheets.

Cutting:

FastStone can be cut with tin snips with the stone surface facing top or a circular saw with the stone surface facing down. To improve the quality of the cut, it is recommended to place a thin piece of plywood of MDF panel on top. To protect against flying debris, we highly recommend wearing eye protection.

Application:

Before applying FastStone+, it is recommended to acclimate the Stone-Veneer sheet and the work object for at least 24 hours to avoid potential damage due to tension and/or warping. FastStone+ is applied, it is almost impossible to remove or re-adjust the sheet from the object without damage. To apply the panels, it is recommended to start at the top corner and work your way down. It is a must to follow a straight line and even line. To press the sheets onto the surface, it is recommended to use a felt or rubber roller.

Available Colors:

  • Black Line
  • Copper
  • Indian Autumn
  • Silver Shine

 

APPLICATION AREAS

PROPERTIES

  • Kitchen Backsplashes
  • Interior Wall-coverings
  • Furniture
  • Cabinetry
  • Real-stone-veneer, each leaf is unique
  • Rough split surface
  • Quick and easy assembly
  • Lightweight and flexible
  • Water impermeable

Technical Properties (Raw Material)

General

Front: Real Stone
Back: 3M PE Form Tape
Temperature limits: -58 /+203 °F
Formaldehyde: Stone-Veneer is Formaldehyde-free
Thermal Expansion (194 °F): 0,5 – 0,8 mm/m ( ≈0,08 %)
Fire Behavior: Individual Assessment

FastStone+ comes with 5 different sizes

5 Different Size Packages

5 Different Size Packages

  • 3″ x 6″
  • 6″ x 6″
  • 6″ x 9″
  • 12″ x 12″
  • 12″ x 24″
3 x 6 Silver Shine (Front View)

3 x 6 Silver Shine (Front View)

3 x 6 Silver Shine (Back View)

3 x 6 Silver Shine (Back View)

6 x 6 Indian Autumn (Front View)

6 x 6 Indian Autumn (Front View)

6 x 6 Indian Autumn (Back View)

6 x 6 Indian Autumn (Back View)

6 x 9 Black Line (Front View)

6 x 9 Black Line (Front View)

6 x 9 Black Line (Back View)

6 x 9 Black Line (Back View)

12 x 12 Silver Shine (Front View)

12 x 12 Silver Shine (Front View)

12 x 12 Silver Shine (Back View)

12 x 12 Silver Shine (Back View)

12 x 24 Copper (Front View)

12 x 24 Copper (Front View)

12 x 24 Copper (Back View)

12 x 24 Copper (Back View)

 

Click here to visit the official site.

RichterREVOFaststone+